Home Home > GIT Browse
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-15Linux 4.15.10v4.15.10Greg Kroah-Hartman
2018-03-15NFS: Fix unstable write completionTrond Myklebust
commit c4f24df942a181699c5bab01b8e5e82b925f77f3 upstream. We do want to respect the FLUSH_SYNC argument to nfs_commit_inode() to ensure that all outstanding COMMIT requests to the inode in question are complete. Currently we may exit early from both nfs_commit_inode() and nfs_write_inode() even if there are COMMIT requests in flight, or unstable writes on the commit list. In order to get the right semantics w.r.t. sync_inode(), we don't need to have nfs_commit_inode() reset the inode dirty flags when called from nfs_wb_page() and/or nfs_wb_all(). We just need to ensure that nfs_write_inode() leaves them in the right state if there are outstanding commits, or stable pages. Reported-by: Scott Mayhew <smayhew@redhat.com> Fixes: dc4fd9ab01ab ("nfs: don't wait on commit in nfs_commit_inode()...") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15pNFS: Prevent the layout header refcount going to zero in pnfs_roc()Trond Myklebust
commit 9c6376ebddad585da4238532dd6d90ae23ffee67 upstream. Ensure that we hold a reference to the layout header when processing the pNFS return-on-close so that the refcount value does not inadvertently go to zero. Reported-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.10+ Tested-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15NFS: Fix an incorrect type in struct nfs_direct_reqTrond Myklebust
commit d9ee65539d3eabd9ade46cca1780e3309ad0f907 upstream. The start offset needs to be of type loff_t. Fixed: 5fadeb47dcc5c ("nfs: count DIO good bytes correctly with mirroring") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix memory leak in dual/target modehimanshu.madhani@cavium.com
commit 7867b98dceb7741065c9c1b645136facad5c2e93 upstream. When driver is loaded in Target/Dual mode, it creates QPair to support MQ and allocates resources for each QPair. This Qpair initialization is delayed until the FW personality is changed to Dual/Target mode by issuing chip reset. At the time of chip reset firmware is re-initilized in correct personality all the QPairs are initialized by sending MBC_INITIALIZE_MULTIQ (001Fh). This patch fixes memory leak by adding check to issue MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the flag is set for initiator mode, and clean up QPair resources correctly during the driver unload. This MBX does not need to be issued for Target/Dual mode because chip reset will reset ISP. Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix system crash in qlt_plogi_ack_unrefQuinn Tran
commit 19759033e0d0beed70421ab9258f5ede79e070ae upstream. Fix system crash due to NULL pointer access. qlt_plogi_ack_t and fc_port structures were not properly bound before calling qlt_plogi_ack_unref(). RIP: 0010:qlt_plogi_ack_unref+0xa1/0x150 [qla2xxx] Call Trace: qla24xx_create_new_sess+0xb1/0x320 [qla2xxx] qla2x00_do_work+0x123/0x260 [qla2xxx] qla2x00_iocb_work_fn+0x30/0x40 [qla2xxx] process_one_work+0x1f3/0x530 worker_thread+0x4e/0x480 kthread+0x10c/0x140 Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Remove aborting ELS IOCB call issued as part of timeout.Giridhar Malavali
commit bf07ef86e882013522876f7c834c8eea085f35b4 upstream. This fix the spinlock recursion issue seen while unloading the driver. 14 [ffff9f2e21e03db8] native_queued_spin_lock_slowpath at ffffffffad0d8802 15 [ffff9f2e21e03dc0] do_raw_spin_lock at ffffffffad0d99e4 16 [ffff9f2e21e03dd8] _raw_spin_lock_irqsave at ffffffffad652471 17 [ffff9f2e21e03e00] qla2x00_els_dcmd_iocb_timeout at ffffffffc070cd63 18 [ffff9f2e21e03e40] qla2x00_sp_timeout at ffffffffc06f06d3 [qla2xxx] 19 [ffff9f2e21e03e68] call_timer_fn at ffffffffad0f97d8 20 [ffff9f2e21e03ed8] run_timer_softirq at ffffffffad0faf47 21 [ffff9f2e21e03f68] __softirqentry_text_start at ffffffffad655f32 Fixes: 6eb54715b54bb ("qla2xxx: Added interface to send explicit LOGO.") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Defer processing of GS IOCB callsGiridhar Malavali
commit 5d3300a9b8b122b4743aed5a178bf12c87e2b8c9 upstream. This patch defers processing of GS IOCB calls from interrupt context to avoid hardware spinlock recursion. Following stack trace is seen ? mod_timer+0x193/0x330 ? ql_dbg+0xa7/0xf0 [qla2xxx] _raw_spin_lock_irqsave+0x31/0x40 qla2x00_start_sp+0x3b/0x250 [qla2xxx] qla24xx_async_gnl+0x1d3/0x240 [qla2xxx] qla24xx_fcport_handle_login+0x285/0x290 [qla2xxx] ? vprintk_func+0x20/0x50 Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Clear loop id after deleteQuinn Tran
commit ba743f9148e951abe1c94f89c174ec8e44fb145b upstream. Clear loop id after delete to prevent session invalidation of stale session. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix scan state field for fcportQuinn Tran
commit 76f9a2dd4c60183879a1898bcd56a1dbab19a85d upstream. Add correct value of scan_state field indicating state of the FC port Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcportQuinn Tran
commit 063b36d6b0ad74c748d536f5cb47bac2f850a0fa upstream. Current code manually allocate an fcport structure that is not properly initialize. Replace kzalloc with qla2x00_alloc_fcport, so that all fields are initialized. Also set set scan flag to port found Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix abort command deadlock due to spinlockQuinn Tran
commit b0dcce746b32ac573343ad39cb3dc485030de95e upstream. Original code acquires hardware_lock to add Abort IOCB onto driver request queue for processing. However, abort_command() will also acquire hardware lock to look up sp pointer before issuing abort IOCB command resulting into a deadlock. This patch safely removes the possible deadlock scenario by removing extra spinlock. Fixes: 6eb54715b54bb ("qla2xxx: Added interface to send explicit LOGO.") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix PRLI state checkQuinn Tran
commit 23c645595dab7b414f23639d0a428a07515807df upstream. Get Port Database MBX cmd is to validate current Login state upon PRLI completion. Current code looks at the last login state for re-validation which was incorrect. This patch removed incorrect state check. Fixes: 15f30a5752287 ("qla2xxx: Use IOCB interface to submit non-critical MBX.") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix Relogin being triggered too fastQuinn Tran
commit 4005a995668b8fd58f4cf1460dd4cf63efa18363 upstream. Current driver design schedules relogin process via DPC thread every 1 second. In a large fabric, this DPC thread tries to schedule too many jobs and might get overloaded. As a result of this processing of DPC thread, it can schedule relogin earlier than 1 second. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Relogin to target port on a cable swapQuinn Tran
commit 5ef696aa9f3ccf999552d924c4e21a348f2bbea9 upstream. If user swaps one target port for another target port for same switch port, the new target port is not being recognized by the driver. Current code assumes that old Target port has recovered from link down. The fix will ask switch what is the WWPN of a specific NportID (GPNID) rather than assuming it's the same Target port which has came back. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix NPIV host cleanup in target modeSawan Chandak
commit 3be63b1e1838e35ce93e83f19573e949f4b389b4 upstream. Add check to make sure we are cleaning up global target host list only for NPIV hosts Fixes: bdbe24de281e2 ("scsi: qla2xxx: Cleanup NPIV host in target mode during config teardown") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix login state machine stuck at GPDBQuinn Tran
commit 414d9ff3f8039f85d23f619dcbbd1ba2628a1a67 upstream. This patch returns discovery state machine back to Login Complete. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Serialize GPNID for multiple RSCNQuinn Tran
commit 2d73ac6102d943c4be4945735a338005359c6abc upstream. GPNID is triggered by RSCN. For multiple RSCNs of the same affected NPORT ID, serialize the GPNID to prevent confusion. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Retry switch command on time outQuinn Tran
commit 25ad76b703d9ad536f3411b15b1070aeb059ab55 upstream. Retry GID_PN & GPN_ID switch commands for time out case. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix re-login for Nport Handle in useQuinn Tran
commit a084fd68e1d26174c4cc1a13fbb0112f468ff7f4 upstream. When NPort Handle is in use, driver needs to mark the handle as used and pick another. Instead, the code clears the handle and re-pick the same handle. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Skip IRQ affinity for Target QPairsQuinn Tran
commit d68b850e1bfb9afb24b888a946165a186a710195 upstream. Fix co-existence between Block MQ and Target Mode. Block MQ and initiator mode requires midlayer queue mapping to check for IRQ to be affinitized. For target mode, it's not the case. Fixes: 09620eeb62c41 ("scsi: qla2xxx: Add debug knob for user control workload") Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Move session delete to driver work queueQuinn Tran
commit a01c77d2cbc45ba527e884e5c30363a1200a4130 upstream. Move session delete from system work queue to driver's work queue for in time processing. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix gpnid error processingQuinn Tran
commit 22e786ea47f8795c561e1a01b6a66bb2cae2fc20 upstream. Stop GPNID command from advancing if command has failed. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15scsi: qla2xxx: Fix system crash for Notify ack timeout handlingQuinn Tran
commit 2e01d0ba868ec1d4d55ddcba519339e072b0bf4d upstream. Fix NULL pointer crash due to missing timeout handling callback for Notify Ack IOCB. Fixes: 726b85487067d ("qla2xxx: Add framework for async fabric discovery") Cc: <stable@vger.kernel.org> # 4.10+ Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15x86/xen: Calculate __max_logical_packages on PV domainsPrarit Bhargava
commit 63e708f826bb21470155d37b103a75d8a9e25b18 upstream. The kernel panics on PV domains because native_smp_cpus_done() is only called for HVM domains. Calculate __max_logical_packages for PV domains. Fixes: b4c0a7326f5d ("x86/smpboot: Fix __max_logical_packages estimate") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Tested-and-reported-by: Simon Gaiser <simon@invisiblethingslab.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: xen-devel@lists.xenproject.org Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15tpm: only attempt to disable the LPC CLKRUN if is already enabledJavier Martinez Canillas
commit 6c9f0ce0dffe64da2204f38b0fd90f3ae2a8903c upstream. Commit 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems") added logic in the TPM TIS driver to disable the Low Pin Count CLKRUN signal during TPM transactions. Unfortunately this breaks other devices that are attached to the LPC bus like for example PS/2 mouse and keyboards. One flaw with the logic is that it assumes that the CLKRUN is always enabled, and so it unconditionally enables it after a TPM transaction. But it could be that the CLKRUN# signal was already disabled in the LPC bus and so after the driver probes, CLKRUN_EN will remain enabled which may break other devices that are attached to the LPC bus but don't have support for the CLKRUN protocol. Fixes: 5e572cab92f0 ("tpm: Enable CLKRUN protocol for Braswell systems") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: James Ettle <james@ettle.org.uk> Tested-by: Jeffery Miller <jmiller@neverware.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15tpm: remove unused variablesArnd Bergmann
commit 68021bf4734d15c9a9ed1c1072b9ebcfda3e39cc upstream. The CLKRUN fix caused a few harmless compile-time warnings: drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_pnp_remove': drivers/char/tpm/tpm_tis.c:274:23: error: unused variable 'priv' [-Werror=unused-variable] drivers/char/tpm/tpm_tis.c: In function 'tpm_tis_plat_remove': drivers/char/tpm/tpm_tis.c:324:23: error: unused variable 'priv' [-Werror=unused-variable] This removes the variables that have now become unused. Fixes: 6d0866cbc2d3 ("tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15tpm: delete the TPM_TIS_CLK_ENABLE flagJavier Martinez Canillas
commit 764325add6c2ad1641199edde7b2995495fc2d7c upstream. This flag is only used to warn if CLKRUN_EN wasn't disabled on Braswell systems, but the only way this can happen is if the code is not correct. So it's an unnecessary check that just makes the code harder to read. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15tpm: Keep CLKRUN enabled throughout the duration of transmit_cmd()Azhar Shaikh
commit b3e958ce4c585bf666de249dc794971ebc62d2d3 upstream. Commit 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell systems") disabled CLKRUN protocol during TPM transactions and re-enabled once the transaction is completed. But there were still some corner cases observed where, reading of TPM header failed for savestate command while going to suspend, which resulted in suspend failure. To fix this issue keep the CLKRUN protocol disabled for the entire duration of a single TPM command and not disabling and re-enabling again for every TPM transaction. For the other TPM accesses outside TPM command flow, add a higher level of disabling and re-enabling the CLKRUN protocol, instead of doing for every TPM transaction. Fixes: 5e572cab92f0bb5 ("tpm: Enable CLKRUN protocol for Braswell systems") Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15tpm_tis: Move ilb_base_addr to tpm_tis_dataAzhar Shaikh
commit c382babccba2c82fe57f9e647f290fb7bf4d130d upstream. Move static variable ilb_base_addr to tpm_tis_data. Cc: stable@vger.kernel.org Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: use skb_to_full_sk in ip6_route_me_harderEric Dumazet
commit 7d98386d55a5afaa65de77e1e9197edeb8a42079 upstream. For some reason, Florian forgot to apply to ip6_route_me_harder the fix that went in commit 29e09229d9f2 ("netfilter: use skb_to_full_sk in ip_route_me_harder") Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")  Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pktFlorian Westphal
commit b078556aecd791b0e5cb3a59f4c3a14273b52121 upstream. l4proto->manip_pkt() can cause reallocation of skb head so pointer to the ipv6 header must be reloaded. Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com> Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: bridge: ebt_among: add missing match size checksFlorian Westphal
commit c4585a2823edf4d1326da44d1524ecbfda26bb37 upstream. ebt_among is special, it has a dynamic match size and is exempt from the central size checks. Therefore it must check that the size of the match structure provided from userspace is sane by making sure em->match_size is at least the minimum size of the expected structure. The module has such a check, but its only done after accessing a structure that might be out of bounds. tested with: ebtables -A INPUT ... \ --among-dst fe:fe:fe:fe:fe:fe --among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsetsFlorian Westphal
commit b71812168571fa55e44cdd0254471331b9c4c4c6 upstream. We need to make sure the offsets are not out of range of the total size. Also check that they are in ascending order. The WARN_ON triggered by syzkaller (it sets panic_on_warn) is changed to also bail out, no point in continuing parsing. Briefly tested with simple ruleset of -A INPUT --limit 1/s' --log plus jump to custom chains using 32bit ebtables binary. Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: IDLETIMER: be syzkaller friendlyEric Dumazet
commit cfc2c740533368b96e2be5e0a4e8c3cace7d9814 upstream. We had one report from syzkaller [1] First issue is that INIT_WORK() should be done before mod_timer() or we risk timer being fired too soon, even with a 1 second timer. Second issue is that we need to reject too big info->timeout to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or risk looping, if result after overflow is 0. [1] WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x211/0x2d0 lib/bug.c:184 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988 RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 RSP: 0018:ffff8801db507538 EFLAGS: 00010006 RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404 RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082 RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6 R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488 queue_work include/linux/workqueue.h:488 [inline] schedule_work include/linux/workqueue.h:546 [inline] idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184 RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12 RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006 RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282 RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8 R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378 debug_object_init+0x17/0x20 lib/debugobjects.c:391 __init_work+0x2b/0x60 kernel/workqueue.c:506 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline] idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976 SYSC_setsockopt net/socket.c:1850 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1829 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: nat: cope with negative port rangePaolo Abeni
commit db57ccf0f2f4624b4c4758379f8165277504fbd7 upstream. syzbot reported a division by 0 bug in the netfilter nat code: divide error: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4168 Comm: syzkaller034710 Not tainted 4.16.0-rc1+ #309 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: 0018:ffff8801b2466778 EFLAGS: 00010246 RAX: 000000000000f153 RBX: ffff8801b2466dd8 RCX: ffff8801b2466c7c RDX: 0000000000000000 RSI: ffff8801b2466c58 RDI: ffff8801db5293ac RBP: ffff8801b24667d8 R08: ffff8801b8ba6dc0 R09: ffffffff88af5900 R10: ffff8801b24666f0 R11: 0000000000000000 R12: 000000002990f153 R13: 0000000000000001 R14: 0000000000000000 R15: ffff8801b2466c7c FS: 00000000017e3880(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208fdfe4 CR3: 00000001b5340002 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: dccp_unique_tuple+0x40/0x50 net/netfilter/nf_nat_proto_dccp.c:30 get_unique_tuple+0xc28/0x1c10 net/netfilter/nf_nat_core.c:362 nf_nat_setup_info+0x1c2/0xe00 net/netfilter/nf_nat_core.c:406 nf_nat_redirect_ipv6+0x306/0x730 net/netfilter/nf_nat_redirect.c:124 redirect_tg6+0x7f/0xb0 net/netfilter/xt_REDIRECT.c:34 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_nat_do_chain+0x65/0x80 net/ipv6/netfilter/ip6table_nat.c:41 nf_nat_ipv6_fn+0x594/0xa80 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:302 nf_nat_ipv6_local_fn+0x33/0x5d0 net/ipv6/netfilter/nf_nat_l3proto_ipv6.c:407 ip6table_nat_local_fn+0x2c/0x40 net/ipv6/netfilter/ip6table_nat.c:69 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] NF_HOOK include/linux/netfilter.h:286 [inline] ip6_xmit+0x10ec/0x2260 net/ipv6/ip6_output.c:277 inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139 dccp_transmit_skb+0x9ac/0x10f0 net/dccp/output.c:142 dccp_connect+0x369/0x670 net/dccp/output.c:564 dccp_v6_connect+0xe17/0x1bf0 net/dccp/ipv6.c:946 __inet_stream_connect+0x2d4/0xf00 net/ipv4/af_inet.c:620 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:684 SYSC_connect+0x213/0x4a0 net/socket.c:1639 SyS_connect+0x24/0x30 net/socket.c:1620 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x441c69 RSP: 002b:00007ffe50cc0be8 EFLAGS: 00000217 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 0000000000441c69 RDX: 000000000000001c RSI: 00000000208fdfe4 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000538 R11: 0000000000000217 R12: 0000000000403590 R13: 0000000000403620 R14: 0000000000000000 R15: 0000000000000000 Code: 48 89 f0 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 46 02 00 00 48 8b 45 c8 44 0f b7 20 e8 88 97 04 fd 31 d2 41 0f b7 c4 4c 89 f9 <41> f7 f6 48 c1 e9 03 48 b8 00 00 00 00 00 fc ff df 0f b6 0c 01 RIP: nf_nat_l4proto_unique_tuple+0x291/0x530 net/netfilter/nf_nat_proto_common.c:88 RSP: ffff8801b2466778 The problem is that currently we don't have any check on the configured port range. A port range == -1 triggers the bug, while other negative values may require a very long time to complete the following loop. This commit addresses the issue swapping the two ends on negative ranges. The check is performed in nf_nat_l4proto_unique_tuple() since the nft nat loads the port values from nft registers at runtime. v1 -> v2: use the correct 'Fixes' tag v2 -> v3: update commit message, drop unneeded READ_ONCE() Fixes: 5b1158e909ec ("[NETFILTER]: Add NAT support for nf_conntrack") Reported-by: syzbot+8012e198bd037f4871e5@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: x_tables: fix missing timer initialization in xt_LEDPaolo Abeni
commit 10414014bc085aac9f787a5890b33b5605fbcfc4 upstream. syzbot reported that xt_LED may try to use the ledinternal->timer without previously initializing it: ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 1826 Comm: kworker/1:2 Not tainted 4.15.0+ #306 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:__mod_timer kernel/time/timer.c:958 [inline] RIP: 0010:mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: 0018:ffff8801d24fe9f8 EFLAGS: 00010293 RAX: ffff8801d25246c0 RBX: ffff8801aec6cb50 RCX: ffffffff816052c6 RDX: 0000000000000000 RSI: 00000000fffbd14b RDI: ffff8801aec6cb68 RBP: ffff8801d24fec98 R08: 0000000000000000 R09: 1ffff1003a49fd6c R10: ffff8801d24feb28 R11: 0000000000000005 R12: dffffc0000000000 R13: ffff8801d24fec70 R14: 00000000fffbd14b R15: ffff8801af608f90 FS: 0000000000000000(0000) GS:ffff8801db500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000206d6fd0 CR3: 0000000006a22001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: led_tg+0x1db/0x2e0 net/netfilter/xt_LED.c:75 ip6t_do_table+0xc2a/0x1a30 net/ipv6/netfilter/ip6_tables.c:365 ip6table_raw_hook+0x65/0x80 net/ipv6/netfilter/ip6table_raw.c:42 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0xba/0x1a0 net/netfilter/core.c:483 nf_hook.constprop.27+0x3f6/0x830 include/linux/netfilter.h:243 NF_HOOK include/linux/netfilter.h:286 [inline] ndisc_send_skb+0xa51/0x1370 net/ipv6/ndisc.c:491 ndisc_send_ns+0x38a/0x870 net/ipv6/ndisc.c:633 addrconf_dad_work+0xb9e/0x1320 net/ipv6/addrconf.c:4008 process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429 Code: 85 2a 0b 00 00 4d 8b 3c 24 4d 85 ff 75 9f 4c 8b bd 60 fd ff ff e8 bb 57 10 00 65 ff 0d 94 9a a1 7e e9 d9 fc ff ff e8 aa 57 10 00 <0f> 0b e8 a3 57 10 00 e9 14 fb ff ff e8 99 57 10 00 4c 89 bd 70 RIP: __mod_timer kernel/time/timer.c:958 [inline] RSP: ffff8801d24fe9f8 RIP: mod_timer+0x7d6/0x13c0 kernel/time/timer.c:1102 RSP: ffff8801d24fe9f8 ---[ end trace f661ab06f5dd8b3d ]--- The ledinternal struct can be shared between several different xt_LED targets, but the related timer is currently initialized only if the first target requires it. Fix it by unconditionally initializing the timer struct. v1 -> v2: call del_timer_sync() unconditionally, too. Fixes: 268cb38e1802 ("netfilter: x_tables: add LED trigger target") Reported-by: syzbot+10c98dc5725c6c8fc7fb@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: xt_hashlimit: fix lock imbalanceEric Dumazet
commit de526f401284e1638d4c97cb5a4c292ac3f37655 upstream. syszkaller found that rcu was not held in hashlimit_mt_common() We only need to enable BH at this point. Fixes: bea74641e378 ("netfilter: xt_hashlimit: add rate match mode") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: ipt_CLUSTERIP: fix a race condition of proc file creationCong Wang
commit b3e456fce9f51d6276e576d00271e2813c1b8b67 upstream. There is a race condition between clusterip_config_entry_put() and clusterip_config_init(), after we release the spinlock in clusterip_config_entry_put(), a new proc file with a same IP could be created immediately since it is already removed from the configs list, therefore it triggers this warning: ------------[ cut here ]------------ proc_dir_entry 'ipt_CLUSTERIP/172.20.0.170' already registered WARNING: CPU: 1 PID: 4152 at fs/proc/generic.c:330 proc_register+0x2a4/0x370 fs/proc/generic.c:329 Kernel panic - not syncing: panic_on_warn set ... As a quick fix, just move the proc_remove() inside the spinlock. Reported-by: <syzbot+03218bcdba6aa76441a3@syzkaller.appspotmail.com> Fixes: 6c5d5cfbe3c5 ("netfilter: ipt_CLUSTERIP: check duplicate config when initializing") Tested-by: Paolo Abeni <pabeni@redhat.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15netfilter: add back stackpointer size checksFlorian Westphal
commit 57ebd808a97d7c5b1e1afb937c2db22beba3c1f8 upstream. The rationale for removing the check is only correct for rulesets generated by ip(6)tables. In iptables, a jump can only occur to a user-defined chain, i.e. because we size the stack based on number of user-defined chains we cannot exceed stack size. However, the underlying binary format has no such restriction, and the validation step only ensures that the jump target is a valid rule start point. IOW, its possible to build a rule blob that has no user-defined chains but does contain a jump. If this happens, no jump stack gets allocated and crash occurs because no jumpstack was allocated. Fixes: 7814b6ec6d0d6 ("netfilter: xtables: don't save/restore jumpstack offset") Reported-by: syzbot+e783f671527912cd9403@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15watchdog: hpwdt: Remove legacy NMI sourcing.Jerry Hoemann
commit 2b3d89b402b085b08498e896c65267a145bed486 upstream. Gen8 and prior Proliant systems supported the "CRU" interface to firmware. This interfaces allows linux to "call back" into firmware to source the cause of an NMI. This feature isn't fully utilized as the actual source of the NMI isn't printed, the driver only indicates that the source couldn't be determined when the call fails. With the advent of Gen9, iCRU replaces the CRU. The call back feature is no longer available in firmware. To be compatible and not attempt to call back into firmware on system not supporting CRU, the SMBIOS table is consulted to determine if it is safe to make the call back or not. This results in about half of the driver code being devoted to either making CRU calls or determing if it is safe to make CRU calls. As noted, the driver isn't really using the results of the CRU calls. Furthermore, as a consequence of the Spectre security issue, the BIOS/EFI calls are being wrapped into Spectre-disabling section. Removing the call back in hpwdt_pretimeout assists in this effort. As the CRU sourcing of the NMI isn't required for handling the NMI and there are security concerns with making the call back, remove the legacy (pre Gen9) NMI sourcing and the DMI code to determine if the system had the CRU interface. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15watchdog: hpwdt: fix unused variable warningArnd Bergmann
commit aeebc6ba88ba3758ad95467ff6191fabf2074c13 upstream. The new hpwdt_my_nmi() function is used conditionally, which produces a harmless warning in some configurations: drivers/watchdog/hpwdt.c:478:12: error: 'hpwdt_my_nmi' defined but not used [-Werror=unused-function] This moves it inside of the #ifdef that protects its caller, to silence the warning. Fixes: 621174a92851 ("watchdog: hpwdt: Check source of NMI") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15watchdog: hpwdt: Check source of NMIJerry Hoemann
commit 838534e50e2e5c1e644e30ab6cb28da88eb31368 upstream. Do not claim the NMI (i.e. return NMI_DONE) if the source of the NMI isn't the iLO watchdog or debug. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15watchdog: hpwdt: SMBIOS checkJerry Hoemann
commit c42cbe41727a138905a28f8e0b00c147be77ee93 upstream. This corrects: commit cce78da76601 ("watchdog: hpwdt: Add check for UEFI bits") The test on HPE SMBIOS extension type 219 record "Misc Features" bits for UEFI support is incorrect. The definition of the Misc Features bits in the HPE SMBIOS OEM Extensions specification (and related firmware) was changed to use a different pair of bits to represent UEFI supported. Howerver, a corresponding change to Linux was missed. Current code/platform work because the iCRU test is working. But purpose of cce78da766 is to ensure correct functionality on future systems where iCRU isn't supported. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15x86/kprobes: Fix kernel crash when probing .entry_trampoline codeFrancis Deslauriers
commit c07a8f8b08ba683ea24f3ac9159f37ae94daf47f upstream. Disable the kprobe probing of the entry trampoline: .entry_trampoline is a code area that is used to ensure page table isolation between userspace and kernelspace. At the beginning of the execution of the trampoline, we load the kernel's CR3 register. This has the effect of enabling the translation of the kernel virtual addresses to physical addresses. Before this happens most kernel addresses can not be translated because the running process' CR3 is still used. If a kprobe is placed on the trampoline code before that change of the CR3 register happens the kernel crashes because int3 handling pages are not accessible. To fix this, add the .entry_trampoline section to the kprobe blacklist to prohibit the probing of code before all the kernel pages are accessible. Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: mathieu.desnoyers@efficios.com Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Fix 32-bit buildJosh Poimboeuf
commit 63474dc4ac7ed3848a4786b9592dd061901f606d upstream. Fix the objtool build when cross-compiling a 64-bit kernel on a 32-bit host. This also simplifies read_retpoline_hints() a bit and makes its implementation similar to most of the other annotation reading functions. Reported-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b5bc2231b8ad ("objtool: Add retpoline validation") Link: http://lkml.kernel.org/r/2ca46c636c23aa9c9d57d53c75de4ee3ddf7a7df.1520380691.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Fix another switch table detection issueJosh Poimboeuf
commit 1402fd8ed7e5bda1b3e7613b70780b0db392d1e6 upstream. Continue the switch table detection whack-a-mole. Add a check to distinguish KASAN data reads from switch data reads. The switch jump tables in .rodata have relocations associated with them. This fixes the following warning: crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool, retpolines: Integrate objtool with retpoline support more closelyPeter Zijlstra
commit d5028ba8ee5a18c9d0bb926d883c28b370f89009 upstream. Disable retpoline validation in objtool if your compiler sucks, and otherwise select the validation stuff for CONFIG_RETPOLINE=y (most builds would already have it set due to ORC). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Add module specific retpoline rulesPeter Zijlstra
commit ca41b97ed9124fd62323a162de5852f6e28f94b8 upstream. David allowed retpolines in .init.text, except for modules, which will trip up objtool retpoline validation, fix that. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15objtool: Add retpoline validationPeter Zijlstra
commit b5bc2231b8ad4387c9641f235ca0ad8cd300b6df upstream. David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled builds, where it validates no unannotated indirect jumps or calls are left. Add an additional .discard.retpoline_safe section to allow annotating the few indirect sites that are required and safe. Requested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>