Home Home > GIT Browse
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-10-23 18:08:22 +0900
committerLinus Torvalds <torvalds@linux-foundation.org>2015-10-23 18:08:22 +0900
commita67b20d24c9ed3719146c9a5e95937c38c89e16a (patch)
tree644187f6dbfef0ea6c2dad2f1138a832cea81a1f
parent8a70dd2669200ce83255ed8c5ebef7e59f9e8707 (diff)
parentc50f13f911b90a722308bffbf26187ff3890aa1e (diff)
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie: "I've been a bit slow gathering these: - drm/mst: one mutex leak in a fail path - radeon: two oops fixes, one dpm fix - i915: one messy set of fixes, where we revert the original fix, and pull back the proper set of fixes from -next on top. - nouveau: one fix for an illegal buffer placement. Doesn't look too bad, hopefully shouldn't be too much more" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/gem: return only valid domain when there's only one drm: fix mutex leak in drm_dp_get_mst_branch_device drm/amdgpu: add missing dpm check for KV dpm late init drm/amdgpu/dpm: don't add pwm attributes if DPM is disabled drm/radeon/dpm: don't add pwm attributes if DPM is disabled drm/i915: Add primary plane to mask if it's visible drm/i915: Move sprite/cursor plane disable to intel_sanitize_crtc() drm/i915: Assign hwmode after encoder state readout Revert "drm/i915: Add primary plane to mask if it's visible" drm/i915: Deny wrapping an userptr into a framebuffer drm/i915: Enable DPLL VGA mode before P1/P2 divider write drm/i915: Restore lost DPLL register write on gen2-4 drm/i915: Flush pipecontrol post-sync writes drm/i915: Fix kerneldoc for i915_gem_shrink_all
-rw-r--r--drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c8
-rw-r--r--drivers/gpu/drm/amd/amdgpu/kv_dpm.c3
-rw-r--r--drivers/gpu/drm/drm_dp_mst_topology.c7
-rw-r--r--drivers/gpu/drm/i915/i915_gem_shrinker.c2
-rw-r--r--drivers/gpu/drm/i915/i915_gem_userptr.c5
-rw-r--r--drivers/gpu/drm/i915/intel_display.c120
-rw-r--r--drivers/gpu/drm/i915/intel_lrc.c1
-rw-r--r--drivers/gpu/drm/i915/intel_ringbuffer.c2
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_gem.c5
-rw-r--r--drivers/gpu/drm/radeon/radeon_pm.c8
10 files changed, 97 insertions, 64 deletions
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
index efed11509f4a..ed2bbe5b10af 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
@@ -294,10 +294,14 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj,
struct amdgpu_device *adev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (!adev->pm.dpm_enabled &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */
diff --git a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c
index 9745ed3a9aef..7e9154c7f1db 100644
--- a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c
+++ b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c
@@ -2997,6 +2997,9 @@ static int kv_dpm_late_init(void *handle)
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
int ret;
+ if (!amdgpu_dpm)
+ return 0;
+
/* init the sysfs and debugfs files late */
ret = amdgpu_pm_sysfs_init(adev);
if (ret)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 5bca390d9ae2..809959d56d78 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -1194,17 +1194,18 @@ static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_
list_for_each_entry(port, &mstb->ports, next) {
if (port->port_num == port_num) {
- if (!port->mstb) {
+ mstb = port->mstb;
+ if (!mstb) {
DRM_ERROR("failed to lookup MSTB with lct %d, rad %02x\n", lct, rad[0]);
- return NULL;
+ goto out;
}
- mstb = port->mstb;
break;
}
}
}
kref_get(&mstb->kref);
+out:
mutex_unlock(&mgr->lock);
return mstb;
}
diff --git a/drivers/gpu/drm/i915/i915_gem_shrinker.c b/drivers/gpu/drm/i915/i915_gem_shrinker.c
index f6ecbda2c604..674341708033 100644
--- a/drivers/gpu/drm/i915/i915_gem_shrinker.c
+++ b/drivers/gpu/drm/i915/i915_gem_shrinker.c
@@ -143,7 +143,7 @@ i915_gem_shrink(struct drm_i915_private *dev_priv,
}
/**
- * i915_gem_shrink - Shrink buffer object caches completely
+ * i915_gem_shrink_all - Shrink buffer object caches completely
* @dev_priv: i915 device
*
* This is a simple wraper around i915_gem_shrink() to aggressively shrink all
diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c
index 8fd431bcdfd3..a96b9006a51e 100644
--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -804,7 +804,10 @@ static const struct drm_i915_gem_object_ops i915_gem_userptr_ops = {
* Also note, that the object created here is not currently a "first class"
* object, in that several ioctls are banned. These are the CPU access
* ioctls: mmap(), pwrite and pread. In practice, you are expected to use
- * direct access via your pointer rather than use those ioctls.
+ * direct access via your pointer rather than use those ioctls. Another
+ * restriction is that we do not allow userptr surfaces to be pinned to the
+ * hardware and so we reject any attempt to create a framebuffer out of a
+ * userptr.
*
* If you think this is a good interface to use to pass GPU memory between
* drivers, please use dma-buf instead. In fact, wherever possible use
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cf418be7d30a..b2270d576979 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1724,6 +1724,15 @@ static void i9xx_enable_pll(struct intel_crtc *crtc)
I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE);
}
+ /*
+ * Apparently we need to have VGA mode enabled prior to changing
+ * the P1/P2 dividers. Otherwise the DPLL will keep using the old
+ * dividers, even though the register value does change.
+ */
+ I915_WRITE(reg, 0);
+
+ I915_WRITE(reg, dpll);
+
/* Wait for the clocks to stabilize. */
POSTING_READ(reg);
udelay(150);
@@ -14107,6 +14116,11 @@ static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
+ if (obj->userptr.mm) {
+ DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
+ return -EINVAL;
+ }
+
return drm_gem_handle_create(file, &obj->base, handle);
}
@@ -14897,9 +14911,19 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
/* restore vblank interrupts to correct state */
drm_crtc_vblank_reset(&crtc->base);
if (crtc->active) {
+ struct intel_plane *plane;
+
drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode);
update_scanline_offset(crtc);
drm_crtc_vblank_on(&crtc->base);
+
+ /* Disable everything but the primary plane */
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ if (plane->base.type == DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ plane->disable_plane(&plane->base, &crtc->base);
+ }
}
/* We need to sanitize the plane -> pipe mapping first because this will
@@ -15067,38 +15091,25 @@ void i915_redisable_vga(struct drm_device *dev)
i915_redisable_vga_power_on(dev);
}
-static bool primary_get_hw_state(struct intel_crtc *crtc)
+static bool primary_get_hw_state(struct intel_plane *plane)
{
- struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
- return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE);
+ return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE;
}
-static void readout_plane_state(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state)
+/* FIXME read out full plane state for all planes */
+static void readout_plane_state(struct intel_crtc *crtc)
{
- struct intel_plane *p;
- struct intel_plane_state *plane_state;
- bool active = crtc_state->base.active;
-
- for_each_intel_plane(crtc->base.dev, p) {
- if (crtc->pipe != p->pipe)
- continue;
-
- plane_state = to_intel_plane_state(p->base.state);
+ struct drm_plane *primary = crtc->base.primary;
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(primary->state);
- if (p->base.type == DRM_PLANE_TYPE_PRIMARY) {
- plane_state->visible = primary_get_hw_state(crtc);
- if (plane_state->visible)
- crtc->base.state->plane_mask |=
- 1 << drm_plane_index(&p->base);
- } else {
- if (active)
- p->disable_plane(&p->base, &crtc->base);
+ plane_state->visible =
+ primary_get_hw_state(to_intel_plane(primary));
- plane_state->visible = false;
- }
- }
+ if (plane_state->visible)
+ crtc->base.state->plane_mask |= 1 << drm_plane_index(primary);
}
static void intel_modeset_readout_hw_state(struct drm_device *dev)
@@ -15121,34 +15132,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
crtc->base.state->active = crtc->active;
crtc->base.enabled = crtc->active;
- memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
- if (crtc->base.state->active) {
- intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
- intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
- WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
-
- /*
- * The initial mode needs to be set in order to keep
- * the atomic core happy. It wants a valid mode if the
- * crtc's enabled, so we do the above call.
- *
- * At this point some state updated by the connectors
- * in their ->detect() callback has not run yet, so
- * no recalculation can be done yet.
- *
- * Even if we could do a recalculation and modeset
- * right now it would cause a double modeset if
- * fbdev or userspace chooses a different initial mode.
- *
- * If that happens, someone indicated they wanted a
- * mode change, which means it's safe to do a full
- * recalculation.
- */
- crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
- }
-
- crtc->base.hwmode = crtc->config->base.adjusted_mode;
- readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state));
+ readout_plane_state(crtc);
DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n",
crtc->base.base.id,
@@ -15207,6 +15191,36 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
connector->base.name,
connector->base.encoder ? "enabled" : "disabled");
}
+
+ for_each_intel_crtc(dev, crtc) {
+ crtc->base.hwmode = crtc->config->base.adjusted_mode;
+
+ memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
+ if (crtc->base.state->active) {
+ intel_mode_from_pipe_config(&crtc->base.mode, crtc->config);
+ intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config);
+ WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode));
+
+ /*
+ * The initial mode needs to be set in order to keep
+ * the atomic core happy. It wants a valid mode if the
+ * crtc's enabled, so we do the above call.
+ *
+ * At this point some state updated by the connectors
+ * in their ->detect() callback has not run yet, so
+ * no recalculation can be done yet.
+ *
+ * Even if we could do a recalculation and modeset
+ * right now it would cause a double modeset if
+ * fbdev or userspace chooses a different initial mode.
+ *
+ * If that happens, someone indicated they wanted a
+ * mode change, which means it's safe to do a full
+ * recalculation.
+ */
+ crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED;
+ }
+ }
}
/* Scan out the current hw modeset state,
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 7412caedcf7f..29dd4488dc49 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -1659,6 +1659,7 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request,
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 6e6b8db996ef..61b451fbd09e 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -347,6 +347,7 @@ gen7_render_ring_flush(struct drm_i915_gem_request *req,
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
@@ -418,6 +419,7 @@ gen8_render_ring_flush(struct drm_i915_gem_request *req,
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
+ flags |= PIPE_CONTROL_FLUSH_ENABLE;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 2c9981512d27..41be584147b9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -227,11 +227,12 @@ nouveau_gem_info(struct drm_file *file_priv, struct drm_gem_object *gem,
struct nouveau_bo *nvbo = nouveau_gem_object(gem);
struct nvkm_vma *vma;
- if (nvbo->bo.mem.mem_type == TTM_PL_TT)
+ if (is_power_of_2(nvbo->valid_domains))
+ rep->domain = nvbo->valid_domains;
+ else if (nvbo->bo.mem.mem_type == TTM_PL_TT)
rep->domain = NOUVEAU_GEM_DOMAIN_GART;
else
rep->domain = NOUVEAU_GEM_DOMAIN_VRAM;
-
rep->offset = nvbo->bo.offset;
if (cli->vm) {
vma = nouveau_bo_vma_find(nvbo, cli->vm);
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 44489cce7458..6a0a176e26ec 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -717,10 +717,14 @@ static umode_t hwmon_attributes_visible(struct kobject *kobj,
struct radeon_device *rdev = dev_get_drvdata(dev);
umode_t effective_mode = attr->mode;
- /* Skip limit attributes if DPM is not enabled */
+ /* Skip attributes if DPM is not enabled */
if (rdev->pm.pm_method != PM_METHOD_DPM &&
(attr == &sensor_dev_attr_temp1_crit.dev_attr.attr ||
- attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr))
+ attr == &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_enable.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_max.dev_attr.attr ||
+ attr == &sensor_dev_attr_pwm1_min.dev_attr.attr))
return 0;
/* Skip fan attributes if fan is not present */