Home Home > GIT Browse
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorFlorian Fainelli <f.fainelli@gmail.com>2017-01-30 09:48:43 -0800
committerDavid S. Miller <davem@davemloft.net>2017-01-30 14:49:58 -0500
commit7318166cacad158b46240f66250d7cc5a481653b (patch)
tree3362ad3da2cbfccbc591a04a47d9e5846a0e620f
parent853458087ef0e5300fa978dccef40b73d411c6e6 (diff)
net: dsa: bcm_sf2: Add support for ethtool::rxnfc
Add support for configuring classification rules using the ethtool::rxnfc API. This is useful to program the switch's CFP/TCAM to redirect specific packets to specific ports/queues for instance. For now, we allow any kind of IPv4 5-tuple matching. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/dsa/Makefile1
-rw-r--r--drivers/net/dsa/bcm_sf2.c14
-rw-r--r--drivers/net/dsa/bcm_sf2.h17
-rw-r--r--drivers/net/dsa/bcm_sf2_cfp.c613
4 files changed, 645 insertions, 0 deletions
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index 8346e4f9737a..da9893478e21 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
+bcm_sf2-objs += bcm_sf2_cfp.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
obj-y += b53/
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 637072da3acf..be282b430c50 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -1045,6 +1045,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
.port_fdb_dump = b53_fdb_dump,
.port_fdb_add = b53_fdb_add,
.port_fdb_del = b53_fdb_del,
+ .get_rxnfc = bcm_sf2_get_rxnfc,
+ .set_rxnfc = bcm_sf2_set_rxnfc,
};
struct bcm_sf2_of_data {
@@ -1168,6 +1170,12 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
spin_lock_init(&priv->indir_lock);
mutex_init(&priv->stats_mutex);
+ mutex_init(&priv->cfp.lock);
+
+ /* CFP rule #0 cannot be used for specific classifications, flag it as
+ * permanently used
+ */
+ set_bit(0, priv->cfp.used);
bcm_sf2_identify_ports(priv, dn->child);
@@ -1197,6 +1205,12 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
return ret;
}
+ ret = bcm_sf2_cfp_rst(priv);
+ if (ret) {
+ pr_err("failed to reset CFP\n");
+ goto out_mdio;
+ }
+
/* Disable all interrupts and request them */
bcm_sf2_intr_disable(priv);
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 6e1f74e4d471..7d3030e04f11 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -52,6 +52,13 @@ struct bcm_sf2_port_status {
struct ethtool_eee eee;
};
+struct bcm_sf2_cfp_priv {
+ /* Mutex protecting concurrent accesses to the CFP registers */
+ struct mutex lock;
+ DECLARE_BITMAP(used, CFP_NUM_RULES);
+ unsigned int rules_cnt;
+};
+
struct bcm_sf2_priv {
/* Base registers, keep those in order with BCM_SF2_REGS_NAME */
void __iomem *core;
@@ -103,6 +110,9 @@ struct bcm_sf2_priv {
/* Bitmask of ports needing BRCM tags */
unsigned int brcm_tag_mask;
+
+ /* CFP rules context */
+ struct bcm_sf2_cfp_priv cfp;
};
static inline struct bcm_sf2_priv *bcm_sf2_to_priv(struct dsa_switch *ds)
@@ -197,4 +207,11 @@ SF2_IO_MACRO(acb);
SWITCH_INTR_L2(0);
SWITCH_INTR_L2(1);
+/* RXNFC */
+int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
+ struct ethtool_rxnfc *nfc, u32 *rule_locs);
+int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port,
+ struct ethtool_rxnfc *nfc);
+int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv);
+
#endif /* __BCM_SF2_H */
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
new file mode 100644
index 000000000000..c71be3e0dc2d
--- /dev/null
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -0,0 +1,613 @@
+/*
+ * Broadcom Starfighter 2 DSA switch CFP support
+ *
+ * Copyright (C) 2016, Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <net/dsa.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <linux/in.h>
+#include <linux/bitmap.h>
+
+#include "bcm_sf2.h"
+#include "bcm_sf2_regs.h"
+
+struct cfp_udf_layout {
+ u8 slices[UDF_NUM_SLICES];
+ u32 mask_value;
+
+};
+
+/* UDF slices layout for a TCPv4/UDPv4 specification */
+static const struct cfp_udf_layout udf_tcpip4_layout = {
+ .slices = {
+ /* End of L2, byte offset 12, src IP[0:15] */
+ CFG_UDF_EOL2 | 6,
+ /* End of L2, byte offset 14, src IP[16:31] */
+ CFG_UDF_EOL2 | 7,
+ /* End of L2, byte offset 16, dst IP[0:15] */
+ CFG_UDF_EOL2 | 8,
+ /* End of L2, byte offset 18, dst IP[16:31] */
+ CFG_UDF_EOL2 | 9,
+ /* End of L3, byte offset 0, src port */
+ CFG_UDF_EOL3 | 0,
+ /* End of L3, byte offset 2, dst port */
+ CFG_UDF_EOL3 | 1,
+ 0, 0, 0
+ },
+ .mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG,
+};
+
+static inline unsigned int bcm_sf2_get_num_udf_slices(const u8 *layout)
+{
+ unsigned int i, count = 0;
+
+ for (i = 0; i < UDF_NUM_SLICES; i++) {
+ if (layout[i] != 0)
+ count++;
+ }
+
+ return count;
+}
+
+static void bcm_sf2_cfp_udf_set(struct bcm_sf2_priv *priv,
+ unsigned int slice_num,
+ const u8 *layout)
+{
+ u32 offset = CORE_UDF_0_A_0_8_PORT_0 + slice_num * UDF_SLICE_OFFSET;
+ unsigned int i;
+
+ for (i = 0; i < UDF_NUM_SLICES; i++)
+ core_writel(priv, layout[i], offset + i * 4);
+}
+
+static int bcm_sf2_cfp_op(struct bcm_sf2_priv *priv, unsigned int op)
+{
+ unsigned int timeout = 1000;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_CFP_ACC);
+ reg &= ~(OP_SEL_MASK | RAM_SEL_MASK);
+ reg |= OP_STR_DONE | op;
+ core_writel(priv, reg, CORE_CFP_ACC);
+
+ do {
+ reg = core_readl(priv, CORE_CFP_ACC);
+ if (!(reg & OP_STR_DONE))
+ break;
+
+ cpu_relax();
+ } while (timeout--);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv,
+ unsigned int addr)
+{
+ u32 reg;
+
+ WARN_ON(addr >= CFP_NUM_RULES);
+
+ reg = core_readl(priv, CORE_CFP_ACC);
+ reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
+ reg |= addr << XCESS_ADDR_SHIFT;
+ core_writel(priv, reg, CORE_CFP_ACC);
+}
+
+static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv)
+{
+ /* Entry #0 is reserved */
+ return CFP_NUM_RULES - 1;
+}
+
+static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port,
+ struct ethtool_rx_flow_spec *fs)
+{
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ struct ethtool_tcpip4_spec *v4_spec;
+ const struct cfp_udf_layout *layout;
+ unsigned int slice_num, rule_index;
+ unsigned int queue_num, port_num;
+ u8 ip_proto, ip_frag;
+ u8 num_udf;
+ u32 reg;
+ int ret;
+
+ /* Check for unsupported extensions */
+ if ((fs->flow_type & FLOW_EXT) &&
+ (fs->m_ext.vlan_etype || fs->m_ext.data[1]))
+ return -EINVAL;
+
+ if (fs->location != RX_CLS_LOC_ANY &&
+ test_bit(fs->location, priv->cfp.used))
+ return -EBUSY;
+
+ if (fs->location != RX_CLS_LOC_ANY &&
+ fs->location > bcm_sf2_cfp_rule_size(priv))
+ return -EINVAL;
+
+ ip_frag = be32_to_cpu(fs->m_ext.data[0]);
+
+ /* We do not support discarding packets, check that the
+ * destination port is enabled and that we are within the
+ * number of ports supported by the switch
+ */
+ port_num = fs->ring_cookie / 8;
+
+ if (fs->ring_cookie == RX_CLS_FLOW_DISC ||
+ !(BIT(port_num) & ds->enabled_port_mask) ||
+ port_num >= priv->hw_params.num_ports)
+ return -EINVAL;
+
+ switch (fs->flow_type & ~FLOW_EXT) {
+ case TCP_V4_FLOW:
+ ip_proto = IPPROTO_TCP;
+ v4_spec = &fs->h_u.tcp_ip4_spec;
+ break;
+ case UDP_V4_FLOW:
+ ip_proto = IPPROTO_UDP;
+ v4_spec = &fs->h_u.udp_ip4_spec;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* We only use one UDF slice for now */
+ slice_num = 1;
+ layout = &udf_tcpip4_layout;
+ num_udf = bcm_sf2_get_num_udf_slices(layout->slices);
+
+ /* Apply the UDF layout for this filter */
+ bcm_sf2_cfp_udf_set(priv, slice_num, layout->slices);
+
+ /* Apply to all packets received through this port */
+ core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7));
+
+ /* S-Tag status [31:30]
+ * C-Tag status [29:28]
+ * L2 framing [27:26]
+ * L3 framing [25:24]
+ * IP ToS [23:16]
+ * IP proto [15:08]
+ * IP Fragm [7]
+ * Non 1st frag [6]
+ * IP Authen [5]
+ * TTL range [4:3]
+ * PPPoE session [2]
+ * Reserved [1]
+ * UDF_Valid[8] [0]
+ */
+ core_writel(priv, v4_spec->tos << 16 | ip_proto << 8 | ip_frag << 7,
+ CORE_CFP_DATA_PORT(6));
+
+ /* UDF_Valid[7:0] [31:24]
+ * S-Tag [23:8]
+ * C-Tag [7:0]
+ */
+ core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_DATA_PORT(5));
+
+ /* C-Tag [31:24]
+ * UDF_n_A8 [23:8]
+ * UDF_n_A7 [7:0]
+ */
+ core_writel(priv, 0, CORE_CFP_DATA_PORT(4));
+
+ /* UDF_n_A7 [31:24]
+ * UDF_n_A6 [23:8]
+ * UDF_n_A5 [7:0]
+ */
+ core_writel(priv, be16_to_cpu(v4_spec->pdst) >> 8,
+ CORE_CFP_DATA_PORT(3));
+
+ /* UDF_n_A5 [31:24]
+ * UDF_n_A4 [23:8]
+ * UDF_n_A3 [7:0]
+ */
+ reg = (be16_to_cpu(v4_spec->pdst) & 0xff) << 24 |
+ (u32)be16_to_cpu(v4_spec->psrc) << 8 |
+ (be32_to_cpu(v4_spec->ip4dst) & 0x0000ff00) >> 8;
+ core_writel(priv, reg, CORE_CFP_DATA_PORT(2));
+
+ /* UDF_n_A3 [31:24]
+ * UDF_n_A2 [23:8]
+ * UDF_n_A1 [7:0]
+ */
+ reg = (u32)(be32_to_cpu(v4_spec->ip4dst) & 0xff) << 24 |
+ (u32)(be32_to_cpu(v4_spec->ip4dst) >> 16) << 8 |
+ (be32_to_cpu(v4_spec->ip4src) & 0x0000ff00) >> 8;
+ core_writel(priv, reg, CORE_CFP_DATA_PORT(1));
+
+ /* UDF_n_A1 [31:24]
+ * UDF_n_A0 [23:8]
+ * Reserved [7:4]
+ * Slice ID [3:2]
+ * Slice valid [1:0]
+ */
+ reg = (u32)(be32_to_cpu(v4_spec->ip4src) & 0xff) << 24 |
+ (u32)(be32_to_cpu(v4_spec->ip4src) >> 16) << 8 |
+ SLICE_NUM(slice_num) | SLICE_VALID;
+ core_writel(priv, reg, CORE_CFP_DATA_PORT(0));
+
+ /* Source port map match */
+ core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7));
+
+ /* Mask with the specific layout for IPv4 packets */
+ core_writel(priv, layout->mask_value, CORE_CFP_MASK_PORT(6));
+
+ /* Mask all but valid UDFs */
+ core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_MASK_PORT(5));
+
+ /* Mask all */
+ core_writel(priv, 0, CORE_CFP_MASK_PORT(4));
+
+ /* All other UDFs should be matched with the filter */
+ core_writel(priv, 0xff, CORE_CFP_MASK_PORT(3));
+ core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(2));
+ core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(1));
+ core_writel(priv, 0xffffff0f, CORE_CFP_MASK_PORT(0));
+
+ /* Locate the first rule available */
+ if (fs->location == RX_CLS_LOC_ANY)
+ rule_index = find_first_zero_bit(priv->cfp.used,
+ bcm_sf2_cfp_rule_size(priv));
+ else
+ rule_index = fs->location;
+
+ /* Insert into TCAM now */
+ bcm_sf2_cfp_rule_addr_set(priv, rule_index);
+
+ ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
+ if (ret) {
+ pr_err("TCAM entry at addr %d failed\n", rule_index);
+ return ret;
+ }
+
+ /* Replace ARL derived destination with DST_MAP derived, define
+ * which port and queue this should be forwarded to.
+ *
+ * We have a small oddity where Port 6 just does not have a
+ * valid bit here (so we subtract by one).
+ */
+ queue_num = fs->ring_cookie % 8;
+ if (port_num >= 7)
+ port_num -= 1;
+
+ reg = CHANGE_FWRD_MAP_IB_REP_ARL | BIT(port_num + DST_MAP_IB_SHIFT) |
+ CHANGE_TC | queue_num << NEW_TC_SHIFT;
+
+ core_writel(priv, reg, CORE_ACT_POL_DATA0);
+
+ /* Set classification ID that needs to be put in Broadcom tag */
+ core_writel(priv, rule_index << CHAIN_ID_SHIFT,
+ CORE_ACT_POL_DATA1);
+
+ core_writel(priv, 0, CORE_ACT_POL_DATA2);
+
+ /* Configure policer RAM now */
+ ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | ACT_POL_RAM);
+ if (ret) {
+ pr_err("Policer entry at %d failed\n", rule_index);
+ return ret;
+ }
+
+ /* Disable the policer */
+ core_writel(priv, POLICER_MODE_DISABLE, CORE_RATE_METER0);
+
+ /* Now the rate meter */
+ ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | RATE_METER_RAM);
+ if (ret) {
+ pr_err("Meter entry at %d failed\n", rule_index);
+ return ret;
+ }
+
+ /* Turn on CFP for this rule now */
+ reg = core_readl(priv, CORE_CFP_CTL_REG);
+ reg |= BIT(port);
+ core_writel(priv, reg, CORE_CFP_CTL_REG);
+
+ /* Flag the rule as being used and return it */
+ set_bit(rule_index, priv->cfp.used);
+ fs->location = rule_index;
+
+ return 0;
+}
+
+static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port,
+ u32 loc)
+{
+ int ret;
+ u32 reg;
+
+ /* Refuse deletion of unused rules, and the default reserved rule */
+ if (!test_bit(loc, priv->cfp.used) || loc == 0)
+ return -EINVAL;
+
+ /* Indicate which rule we want to read */
+ bcm_sf2_cfp_rule_addr_set(priv, loc);
+
+ ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL);
+ if (ret)
+ return ret;
+
+ /* Clear its valid bits */
+ reg = core_readl(priv, CORE_CFP_DATA_PORT(0));
+ reg &= ~SLICE_VALID;
+ core_writel(priv, reg, CORE_CFP_DATA_PORT(0));
+
+ /* Write back this entry into the TCAM now */
+ ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL);
+ if (ret)
+ return ret;
+
+ clear_bit(loc, priv->cfp.used);
+
+ return 0;
+}
+
+static void bcm_sf2_invert_masks(struct ethtool_rx_flow_spec *flow)
+{
+ unsigned int i;
+
+ for (i = 0; i < sizeof(flow->m_u); i++)
+ flow->m_u.hdata[i] ^= 0xff;
+
+ flow->m_ext.vlan_etype ^= cpu_to_be16(~0);
+ flow->m_ext.vlan_tci ^= cpu_to_be16(~0);
+ flow->m_ext.data[0] ^= cpu_to_be32(~0);
+ flow->m_ext.data[1] ^= cpu_to_be32(~0);
+}
+
+static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port,
+ struct ethtool_rxnfc *nfc, bool search)
+{
+ struct ethtool_tcpip4_spec *v4_spec;
+ unsigned int queue_num;
+ u16 src_dst_port;
+ u32 reg, ipv4;
+ int ret;
+
+ if (!search) {
+ bcm_sf2_cfp_rule_addr_set(priv, nfc->fs.location);
+
+ ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | ACT_POL_RAM);
+ if (ret)
+ return ret;
+
+ reg = core_readl(priv, CORE_ACT_POL_DATA0);
+
+ ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL);
+ if (ret)
+ return ret;
+ } else {
+ reg = core_readl(priv, CORE_ACT_POL_DATA0);
+ }
+
+ /* Extract the destination port */
+ nfc->fs.ring_cookie = fls((reg >> DST_MAP_IB_SHIFT) &
+ DST_MAP_IB_MASK) - 1;
+
+ /* There is no Port 6, so we compensate for that here */
+ if (nfc->fs.ring_cookie >= 6)
+ nfc->fs.ring_cookie++;
+ nfc->fs.ring_cookie *= 8;
+
+ /* Extract the destination queue */
+ queue_num = (reg >> NEW_TC_SHIFT) & NEW_TC_MASK;
+ nfc->fs.ring_cookie += queue_num;
+
+ /* Extract the IP protocol */
+ reg = core_readl(priv, CORE_CFP_DATA_PORT(6));
+ switch ((reg & IPPROTO_MASK) >> IPPROTO_SHIFT) {
+ case IPPROTO_TCP:
+ nfc->fs.flow_type = TCP_V4_FLOW;
+ v4_spec = &nfc->fs.h_u.tcp_ip4_spec;
+ break;
+ case IPPROTO_UDP:
+ nfc->fs.flow_type = UDP_V4_FLOW;
+ v4_spec = &nfc->fs.h_u.udp_ip4_spec;
+ break;
+ default:
+ /* Clear to exit the search process */
+ if (search)
+ core_readl(priv, CORE_CFP_DATA_PORT(7));
+ return -EINVAL;
+ }
+
+ v4_spec->tos = (reg >> 16) & IPPROTO_MASK;
+ nfc->fs.m_ext.data[0] = cpu_to_be32((reg >> 7) & 1);
+
+ reg = core_readl(priv, CORE_CFP_DATA_PORT(3));
+ /* src port [15:8] */
+ src_dst_port = reg << 8;
+
+ reg = core_readl(priv, CORE_CFP_DATA_PORT(2));
+ /* src port [7:0] */
+ src_dst_port |= (reg >> 24);
+
+ v4_spec->pdst = cpu_to_be16(src_dst_port);
+ nfc->fs.m_u.tcp_ip4_spec.pdst = cpu_to_be16(~0);
+ v4_spec->psrc = cpu_to_be16((u16)(reg >> 8));
+ nfc->fs.m_u.tcp_ip4_spec.psrc = cpu_to_be16(~0);
+
+ /* IPv4 dst [15:8] */
+ ipv4 = (u16)(reg & 0xff) << 8;
+ reg = core_readl(priv, CORE_CFP_DATA_PORT(1));
+ /* IPv4 dst [31:16] */
+ ipv4 |= (u32)((reg >> 8) & 0xffffff) << 16;
+ /* IPv4 dst [7:0] */
+ ipv4 |= (reg >> 24) & 0xff;
+ v4_spec->ip4dst = cpu_to_be32(ipv4);
+ nfc->fs.m_u.tcp_ip4_spec.ip4dst = cpu_to_be32(~0);
+
+ /* IPv4 src [15:8] */
+ ipv4 = (u16)(reg & 0xff) << 8;
+ reg = core_readl(priv, CORE_CFP_DATA_PORT(0));
+
+ if (!(reg & SLICE_VALID))
+ return -EINVAL;
+
+ /* IPv4 src [7:0] */
+ ipv4 |= (reg >> 24) & 0xff;
+ /* IPv4 src [31:16] */
+ ipv4 |= ((reg >> 8) & 0xffffff) << 16;
+ v4_spec->ip4src = cpu_to_be32(ipv4);
+ nfc->fs.m_u.tcp_ip4_spec.ip4src = cpu_to_be32(~0);
+
+ /* Read last to avoid next entry clobbering the results during search
+ * operations
+ */
+ reg = core_readl(priv, CORE_CFP_DATA_PORT(7));
+ if (!(reg & 1 << port))
+ return -EINVAL;
+
+ bcm_sf2_invert_masks(&nfc->fs);
+
+ /* Put the TCAM size here */
+ nfc->data = bcm_sf2_cfp_rule_size(priv);
+
+ return 0;
+}
+
+/* We implement the search doing a TCAM search operation */
+static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv,
+ int port, struct ethtool_rxnfc *nfc,
+ u32 *rule_locs)
+{
+ unsigned int index = 1, rules_cnt = 0;
+ int ret;
+ u32 reg;
+
+ /* Do not poll on OP_STR_DONE to be self-clearing for search
+ * operations, we cannot use bcm_sf2_cfp_op here because it completes
+ * on clearing OP_STR_DONE which won't clear until the entire search
+ * operation is over.
+ */
+ reg = core_readl(priv, CORE_CFP_ACC);
+ reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT);
+ reg |= index << XCESS_ADDR_SHIFT;
+ reg &= ~(OP_SEL_MASK | RAM_SEL_MASK);
+ reg |= OP_SEL_SEARCH | TCAM_SEL | OP_STR_DONE;
+ core_writel(priv, reg, CORE_CFP_ACC);
+
+ do {
+ /* Wait for results to be ready */
+ reg = core_readl(priv, CORE_CFP_ACC);
+
+ /* Extract the address we are searching */
+ index = reg >> XCESS_ADDR_SHIFT;
+ index &= XCESS_ADDR_MASK;
+
+ /* We have a valid search result, so flag it accordingly */
+ if (reg & SEARCH_STS) {
+ ret = bcm_sf2_cfp_rule_get(priv, port, nfc, true);
+ if (ret)
+ continue;
+
+ rule_locs[rules_cnt] = index;
+ rules_cnt++;
+ }
+
+ /* Search is over break out */
+ if (!(reg & OP_STR_DONE))
+ break;
+
+ } while (index < CFP_NUM_RULES);
+
+ /* Put the TCAM size here */
+ nfc->data = bcm_sf2_cfp_rule_size(priv);
+ nfc->rule_cnt = rules_cnt;
+
+ return 0;
+}
+
+int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
+ struct ethtool_rxnfc *nfc, u32 *rule_locs)
+{
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ int ret = 0;
+
+ mutex_lock(&priv->cfp.lock);
+
+ switch (nfc->cmd) {
+ case ETHTOOL_GRXCLSRLCNT:
+ /* Subtract the default, unusable rule */
+ nfc->rule_cnt = bitmap_weight(priv->cfp.used,
+ CFP_NUM_RULES) - 1;
+ /* We support specifying rule locations */
+ nfc->data |= RX_CLS_LOC_SPECIAL;
+ break;
+ case ETHTOOL_GRXCLSRULE:
+ ret = bcm_sf2_cfp_rule_get(priv, port, nfc, false);
+ break;
+ case ETHTOOL_GRXCLSRLALL:
+ ret = bcm_sf2_cfp_rule_get_all(priv, port, nfc, rule_locs);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ mutex_unlock(&priv->cfp.lock);
+
+ return ret;
+}
+
+int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port,
+ struct ethtool_rxnfc *nfc)
+{
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ int ret = 0;
+
+ mutex_lock(&priv->cfp.lock);
+
+ switch (nfc->cmd) {
+ case ETHTOOL_SRXCLSRLINS:
+ ret = bcm_sf2_cfp_rule_set(ds, port, &nfc->fs);
+ break;
+
+ case ETHTOOL_SRXCLSRLDEL:
+ ret = bcm_sf2_cfp_rule_del(priv, port, nfc->fs.location);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ mutex_unlock(&priv->cfp.lock);
+
+ return ret;
+}
+
+int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv)
+{
+ unsigned int timeout = 1000;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_CFP_ACC);
+ reg |= TCAM_RESET;
+ core_writel(priv, reg, CORE_CFP_ACC);
+
+ do {
+ reg = core_readl(priv, CORE_CFP_ACC);
+ if (!(reg & TCAM_RESET))
+ break;
+
+ cpu_relax();
+ } while (timeout--);
+
+ if (!timeout)
+ return -ETIMEDOUT;
+
+ return 0;
+}